Fountain Hills Arizona Radon Pros - Fountain Hills Arizona Radon Inspection

EMail Us Call Us (623) 388 4806

Fountain Hills Arizona Radon Inspection

Fountain Hills Arizona Radon Professionals provides you a free radon test kit you can order on our websiteand it will be shipped free of charge to your home. Remember that 1 test kit is enough for roughly up to 1,000 square feet. If your house is larger, you will need to order more kits.

The average outdoor level of Radon gas is about 0.4 pCi/L, while the average indoor level is approximately 1.3 pCi/L. As you can see, the recommended limit is much higher than both of those numbers. The US Congress has actually set a goal to achieve indoor Radon levels that do not exceed the outdoor levels. In other words, they want Radon to be equally dispersed indoors and out. Obviously, that goal will not be met any time soon. However, it is certainly possible for any and all residences to maintain a level of 2 pCi/L or below.


About us

AZ Radon Pros is a team of professionals located in Fountain Hills Arizona, with more than 20 years of experience in mitigation services. We specialize in mitigation; this is all we do!

We are NRPP (National Radon Proficiency Program) Certified. The National Radon Proficiency Program (NRPP) is recognized as the nation’s leading certification program for radon professionals. NRPP Certification is an ongoing effort that requires bi-annual documentation of competence, expertise and performance to demonstrate skill, knowledge and professionalism.

We are an Fountain Hills Arizona licensed contractor, bonded and insured.

 


How to remove Radon from your Fountain Hills Arizona Home?

he main method to mitigate Radon is to install a vent pipe system and a fan, to remove radon from the house and vents it to the outside.

It is generally recommended to use methods which prevent the entry of radon. Soil suction is one of them. It prevents radon from entering your home in Fountain Hills Arizona by drawing the radon from below the home and venting it through a pipe or pipes to the air above the home where it is diluted.

Sealing the home alone doesn’t reduce radon because radon can enter anyway.

It is also important to build a new house following the guidelines to reduce radon.

If you're building a home, you can save yourself loads of worry—and money later on down the road—by installing a passive radon control. Here's how:

  • Install a layer of gas-permeable aggregate, such as four inches of gravel, beneath the slab or flooring system of your home if you don't have a crawlspace.
  • Cover this layer or your crawlspace floor with plastic sheeting to stop radon gas from moving past that level and into your home.
  • Seal and caulk all cracks in your foundation and walls. Not only will this help prevent entry of radon, but it'll add to the energy efficiency of your home.
  • Run a three to four inch gas-tight pipe from the first layer or crawlspace to the roof. This will safely vent gases from the soil to the outside.

Wire in an extra circuit to the attic so that a vent fan can be installed to turn the pipe into a vacuum-cleaner, or an active radon control system, which routes the gas out of your home

© 2019 AZ Radon Pros Back to Top